288 CHAPTER 11: MANAGED ACCESS POINT COMMANDS
See Also
set {ap | dap} radio mode on page 341
set {ap | dap} radio radio-profile on page34 3
set port type ap on page 91
clear radio-profile Removes a radio profile or resets one of the profile’s parameters to its
default value.
Syntax — clear radio-profile name [parameter]
name — Radio profile name.
parameter — Radio profile parameter:
beacon-interval
dtim-interval
frag-threshold
long-retry
max-rx-lifetime
max-tx-lifetime
preamble-length
rts-threshold
service-profile
short-retry
(For information about these parameters, see the set radio-profile
commands that use them.)
Defaults — If you reset an individual parameter, the parameter is
returned to the default value listed in Table66 on page 362 .
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — If you specify a parameter, the setting for the parameter is
reset to its default value. The settings of the other parameters are
unchanged and the radio profile remains in the configuration. If you do
not specify a parameter, the entire radio profile is deleted from the
configuration. All radios that use this profile must be disabled before you
can delete the profile.