Agilent Technologies 01664-97005 manual Marker Functions, Auxiliary Power, Operating Environment

General Information

Supplemental Characteristics

Marker Functions

Time Interval The X and O markers measure the time interval between a point on a timing waveform and the trigger, two points on the same timing waveform, two points on different waveforms, or two states (time tagging on).

Delta States (state analyzer only) The X and O markers measure the number of tagged states between one state and trigger or between two states.

Patterns The X and O markers can be used to locate the nth occurrence of a specified pattern from trigger, or from the beginning of data. The O marker can also find the nth occurrence of a pattern from the X marker.

Statistics X and O marker statistics are calculated for repetitive acquisitions. Patterns must be specified for both markers, and statistics are kept only when both patterns can be found in an acquisition. Statistics are minimum X to O time, maximum X to O time, average X to O time, and ratio of valid runs to total runs.

Auxiliary Power
Power Through Cables	1/3 amp at 5 V maximum per cable
Operating Environment
Temperature	Instrument, 0 °C to 55 °C (+32 °F to 131 °F).
	Probe lead sets and cables,
	0 °C to 65 °C (+32 °F to 149 °F).
Humidity	Instrument, probe lead sets, and cables, up to
	95% relative humidity at +40 °C (+122 °F).
Altitude	To 4600 m (15,000 ft).
Vibration	Operating: Random vibration 5 to 500 Hz,
	10 minutes per axis, ≈0.3 g (rms).
	Non-operating: Random vibration 5 to 500 Hz,
	10 minutes per axis, ≈ 2.41 g (rms);
	and swept sine resonant search, 5 to 500 Hz,
	0.75 g (0-peak), 5 minute resonant dwell
	at 4 resonances per axis.
Dimensions

1–6