Agilent Technologies 01664-97005 manual Set up the oscilloscope

Testing Performance

To test the single-clock, single-edge, state acquisition

3Set up the oscilloscope.

Oscilloscope Setup

Time Base	Display	Delta V	Delta T
Time/Div: 1.00 ns/div	avg	V markers on	T markers on
	# of avg: 16	marker 1 position: Chan 1	start on: Pos Edge 1
	screen: dual	marker 2 position: Chan 1	stop on: Neg Edge 1
Channel

	Channel 1	Channel 2
Display	on	on
Probe Atten	20.00	20.00
Offset	−1.3 V	−1.3 V
Volts/Div	400 mV	400 mV

Set up the logic analyzer

1Set up the Configuration menu. a Press the Config key.

b In the Configuration menu, assign all pods to Machine 1. To assign the pods, select the pod fields, then select Machine 1 in the pop-up menu.

c Select the Type field in the Analyzer 1 box, then select State.

3–24