Agilent Technologies 01664-97005 manual To test the glitch capture, Set up the pulse generator

To test the glitch capture

Testing the glitch capture verifies the performance of the following specification:

•Minimum detectable glitch.

This test checks the minimum detectable glitch on sixteen data channels at a time.

Equipment Required

Equipment	Critical Specifications	Recommended Model/Part
Pulse Generator	100 MHz 3.5 ns pulse width, < 600 ps rise time	Agilent 8131A Option 020
Digitizing Oscilloscope	≥ 6 GHz bandwidth , < 58 ps rise time	Agilent 54121T
SMA Coax	18 GHz bandwidth	Agilent 8120-4948
(Qty 3)
Adapter (Qty 4)	SMA(m)-BNC(f)	Agilent 1250-1200
Coupler (Qty 4)	BNC (m)(m)	Agilent 1250-0216
BNC Test Connector, 6x2 (Qty 4)

Set up the equipment

1Turn on the equipment required and the logic analyzer. Let them warm up for 30 minutes before beginning the test if you have not already done so.

2Set up the pulse generator.

Pulse Generator Setup

Channel 1	Channel 2	Period
Delay: 0 ps	Delay : 0 ps	22.0 ns
Width: 3.5 ns	Width: 3.5 ns
High: −0.9 V	High: −0.9 V
Low: −1.7 V	Low: −1.7 V

3–17