If a DLP causes the spectrum analyzer not to respond normally (for example, the spectrum
analyzer seems to be in an infinite loop or an error message is displayed), try one or all of the
following suggestions:
n
Press [PRESET].
n
Press
I-),
More
I
of 3 , ERASE DLP MEM , ERASE DLP
ME!!
. (ERASE DLP MEM requires
a double key press and deletes any
DLPs
from spectrum analyzer memory.)
n Turn the spectrum analyzer off and then back on.
If the spectrum analyzer is still not responding, you should do the following:
n For a spectrum analyzer with Option 021 installed in it, execute the following program line:
SEND 7;UNL MTA LISTEN 18 CMD 12
This semis a command to the spectrum ana-
lyzer instructing it to delete any
DLA
and
usw-
d@rwd
variables from spectrum analyzer memory.
Note
If the spectrum analyzer is not at address 18, change the number 18 in the
previous program line to the spectrum analyzer’s current address.
n For a spectrum analyzer with Option 023 installed in it, execute a break, and then press
@GKZJ
More
i
of 3 , ERASE DLP MEM , ERASE DLP MEN . (ERASE DLP MEM requires a
double key press.)
Creating and Using Downloadable Programs
4-21