Agilent Technologies 8590, 90235 MKPX Marker Peak Excursion

MKPX
Marker Peak Excursion
Specifies the minimum signal excursion for the spectrum analyzer’s internal peak-identification
routine.
Syntax
7 ompl itude value 7
DE
Item Description/Default
R-f3e
Number Any real or integer number. Default unit is
dB.
Oto 100dB.
Equivalent Softkey: PEAK EXCUWN .
Preset State: 6 dB.
Step Increment: by 1 dB.
Related Commands: MKPK, PEAKS.
Example
10 OUTPUT 718;"IP;CF 300MHZ;SP IGHZ;"
20 INPUT "ENTER IN PEAK EXCURSION, IN DB ",Excursion
30 OUTPUT 718;"MKPX ";Excursion;"DB;"
40 OUTPUT 718;"TS;MKPK HI;MKPK NH;"
50 OUTPUT 718;"MKF?;"
60 ENTER 718;Freq
70 IF Freq <> 0 THEN
80 PRINT "PEAK FOUND"
90 ELSE
100 PRINT "NO PEAKS FOUND"
110 END IF
120 END
Initializes spectrum anulym
changes start and stop frequencies.
Changes peak excursion level.
Searches for highest peaks
of trace.
Finds frequency d&@rvnce
between peaks.
Puts the spectrum analyzer
response in the computer
variable, Req.
Outputs results if marker
amplitude was not 0.
Prints “NO PEAKS FOUND”
if Freq = 0.
5-352 Programming Commands