ACPMK Adjacent Channel Power Marker On or Off

ACPMK

Adjacent Channel Power Marker On or Off

Determines if the graph marker function is enabled or disabled for the adjacent channel power
(ACP) graph.
Syntax
xacpmk
Equivalent Softkey:
GRPH
ON
OFF .
Related Commands: ACPGR, ACPGRAPH, CHPGR, ACPSNGLM, ACPCONTM.
Example
OUTPUT
718;"ACP
OUTPUT
718;"MOV
OUTPUT
718;"MOV
. II
8
&forms the
adjacent
channel power measurement.
ACPGR,l;"
Enables the ACP graph function and creates a graph of
ACP as a function of the frequency offset from the center
freq-y.
ACPMK,l;"
Enables the ACP graph
mm-km
Description
Setting ACPMK to 1, does the following for ACP graph:
w
Positions a reference marker on the trace for ACP graph at the center frequency position.
w
Positions a A marker on the trace at one channel spacing above the center frequency.
n Displays numeric values for delta frequency, ACP ratio, and channel power at the marker
position.
Setting ACPMK to 1, does the following for channel power graph:
w
Positions a marker on the trace for channel power graph at center frequency position.
n Displays numeric values for frequency and channel power at the marker position.
Setting the ACPMK to -1, turns off the marker function.
Programming Commands
5.43