LIMIDISP

Limit Line Display

Controls when the limit line (or limit lines) are displayed.
Syntax
Equivalent
Softkey:
LMT
DXSP
Y
N
AUTO .
Preset Value: AUTO.
Related Commands: ANLGPLUS, LIMILINE, LIMITEST.
Example
OUTPUT 718; “LIMIDISP ON;
”
Displays any portion of the limit lines that are currently
within the spectrum analyzer screen boundaries.
Description
If a limit line is currently in spectrum analyzer memory, you can use LIMIDISP to control the
display of the limit lines. The parameters of LIMIDISP do the following:
ON
Turns on the limit line display.
OFF
Turns off the limit line display.
AUTO
Allows LIMITEST to control the display of the limit lines. If LIMITEST is on,
the limit lines will be displayed. If LIMITEST is off, the limit lines will not be
displayed.
UPPER
Displays the upper limit line only.
LOWER
Displays the lower limit line only.
Note
Turning on Analog+ display mode changes the way that LIMIDISP functions as
follows:
n
LIMIDISP ON, LIMIDISP LOWER, and LIMIDISP UPPER do not work when
the Analog+ display mode is turned on.
n
LIMIDISP AUTO will still perform the limit line test if LIMITEST is on, but
the limit lines will not be displayed.
5.270
Programming Commands