Agilent Technologies 8590, 90235 Load , DLPs, from a Memory Card into Analyzer Memory

To Load DLPs from a Memory Card into Analyzer Memory
Once a DLP has been stored on a RAM card, it can be loaded back into spectrum analyzer
memory when desired. DLPs remain in spectrum analyzer memory until disposed of with the
DISPOSE command, ERASE command, or ERASE DLP MEM.
1. To load a DLP from a RAM or ROM card into analyzer memory, insert the memory card into
the memory card reader.
2. Use the MS1 command to select the memory card reader as the mass storage device.
3. Use the LOAD command to copy the contents of the RAM card file into spectrum analyzer
memory.
Example
The following example sets the mass storage device to the memory card reader, and then copies
the contents of RAM card file called Z-OOM into spectrum analyzer memory.
OUTPUT 718;"MSI CARD;LOAD %dZ-OOMX;"
Loads a copy of Z-OOM from the RAM card
into spectrum analyzer memory.
Note that loading does not dispose of any DLPs which were in memory before the load was
executed.
Creating and Using Downloadable Programs
4.11