SRCTKPK Source Tracking Peak

SRCTKPK

Source Tracking Peak

Automatically adjusts the tracking of source output with spectrum-analyzer sweep.
Syntax
Option Required: Option 010 or 011.
Equivalent
Softkey:
TRM!KING
PEAK .
Related Commands: Commands that change bandwidth, such as RB, VB, ST, and commands
that change frequency, such as
SP,
CF, FA, FB, SP, FS, SRCTK.
Restrictions: Not available with Analog+ display mode. See “ANLGPLUS” for more
information.
Example
OUTPUT
718;"MEASURE
SR;"
Activates the stimulus-response
mode.
OUTPUT
718;"SRCPWR
-1ODB;"
Turns on the power at the source output to its
current
setting.
OUTPUT
718;"SP
IMHZ;"
Sets
mhxsurement
range.
OUTPUT
718;"RB
1KHZ;"
OUTPUT
718;"TS;"
lbkes
sweep.
OUTPUT
718;"SRCTKPK;"
Automatically
a@ju.sts
the tracking.’
Description
The SRCTKPK command adjusts the tracking of the tracking-generator source output
automatically to maximize responses for measurements made
with
resolution bandwidths less
than 300
kHz.
SRCTKPK maximizes the amplitude of the displayed active trace.
Programming Commands 5-519