LIMIMODE Limit-Line Entry Mode
Description
Use LIMIMODE in conjunction with LIMISEG, LIMISEGT, SENTER, or SENTERT. Specify
LIMIMODE UPPER or LIMIMODE LOWER before using LIMISEG or LIMISEGT. Specify
LIMIMODE
UPLOW
or LIMIMODE DELTA before using SENTER or SENTERT.
The LIMIMODE command determines whether the limit-line table entries are to be treated
separately (upper or lower) or together (upper and lower) when deleting a segment with
SEGDEL (see “SEGDEL”). If limit-line table entries are entered with LIMISEG or LIMISEGT,
they are treated as entries to separate tables even if LIMIMODE
UPLOW
or LIMIMODE DELTA
had been previously specified.
When used as a predefined variable, LIMIMODE returns a number from 0 to three, depending
on the setting of the LIMIMODE parameter. The number corresponds to the LIMIMODE
parameter as shown in the following table.
Query Response
output
’
termination
---)
QLIMIMODE
5-282 Programming Commands