Description
The value of ACPBW is used when calculating the results of the adjacent channel (ACP),
adjacent channel extended (ACPE), or channel power (CHP) measurement. The value of
ACPBW is also used when ACPPAR is set for automatic coupling the spectrum analyzer settings
for the ACP, ACPE, or CHP measurement.
Once you enter a value into ACPBW, that value is retained until you change it, or execute
DISPOSE ALL. Pressing (FiZ5Fij or turning the spectrum analyzer off does not change the
value of ACPBW.
You can execute the ACPBW command two different ways. You can either execute the ACPBW
command directly (for example,
“ACPBW
IOOKHZ;
‘I)
or use the MOV command to move the value
for the bandwidth into the ACPBW command (for example,
“MOV
ACPBW,lOOKHZ;“).
If you use
the MOV command, no text is displayed in the active function area during command execution.
Query Response
chonne
I
bandwidth
/
\output
termination
+
5-36
Programming Commands