FFTSNGLS FFT Single Sweep
FFTSNGLS uses the following when performing an FFT:
w
The flat top filter window. See “FFT” for more information about the flat top filter window.
w
Trace B and trace C. If you want to save the trace data that is in trace B or trace C, you
should save the trace data before executing FFIAUTO,
FFTCONTS,
or FFTSNGLS. (See
“SAVET” for more information about saving trace data.)
H
The FFTMKR command to turn on the
FFT
markers (you can use the MKA or MKF to
determine the amplitude or frequency of the marker).
You should execute the FFTOFF command when you are finished using the
FFT
measurement.
Programming Commands
5.175