MKPAUSE Marker Pause

MKPAUSE

Marker Pause

Pauses the sweep at the active marker for the duration of the delay period.
Syntax
Item Description/Default Range
Number Any real or integer number.
2msto 100s.
Restrictions: Not available with Analog+ display mode. See “ANLGPLUS” for more
information. Not available with negative peak detection.
Equivalent
Softkey:
MK
PAUSE
ON
OFF.
Step Decrement: Time value divided by 2.
Step Increment: Time value multiplied by 2.
Related Commands: DEMOD, MKA, MKF, MKFC, MKN, MKOFF, ST.
Example
OUTPUT
718;"MKPAUSE
IOSC;"
Changes the marker pause
time
to 10 seconds.
Description
To turn MKPAUSE off, turn off markers or send “MKPAUSE 0;“.
The MKPAUSE command requires a sweep time of 50 ms or longer. The sweep time is changed
to 50 ms if MKPAUSE is used with a sweep time that is less than 50 ms.
After MKPAUSE is executed, the sweep must be completed before another command will be
executed.
Programming Commands 5-349