OUTPUT Output to Remote Port or Parallel Port

OUTPUT

Output to Remote Port or Parallel Port

Allows the spectrum analyzer to send data to other devices via remote or parallel ports.

Syntax
OUTPUT
,-address.-,
predefined
variable
N’
user-defined
variable
I
trace
element
-
f
/
output
doto
\
-
predefined
variable
/
user-defined
variable
/
trace
element
del
imi
ter
delimiter
data
byte
& EOI
I
xoutput
Item
Number
Number
Predefined function
Predefined variable
User-defined variable
Trace element
Msb length
Lsb length
Data byte
Data
byte
&
EOI
Description/Default
Rw3e
An integer number. 0 to 30 (remote port).
An integer number. 40 (parallel port).
Function that returns a value. Refer to
lbble
5-l.
A command that acts as a variable. Refer to
Table
5-l.
A variable
defined
by VARDEF or ACTDEF commands.
Any valid variable
name.
An element of trace A, trace B, trace
C,
or a user-defined trace.
Most signifkant byte of a two-byte word that describes the
number of bytes transmitted.
Least significant byte of a two-byte word that describes the
number of bytes transmitted.
S-bit byte containing numeric or character data.
&bit
byte containing numeric or character data followed by END.
Programming Commands
5.408