PKSORT Peak Sort

PKSORT

Peak Sort

Selects how the signal peaks listed in the peak table are sorted: by decreasing amplitude or by
ascending frequency.
Syntax
decreasing
amp I i
tude
Equivalent
Softkey:
PK
SORT
FRQ
A#P
.
Preset State: 0 (sort by decreasing amplitude).
Related Commands: DL, PKSORT, PKTBL.
Example
OUTPUT
718;"MOV
PKTBL,l;"
Twn.s on the peak table.
OUTPUT
718;"MOV
PKSORT,O;"
Sorts the peaks by &creasing amplitude.
Description
If PKSORT is set to 0, the spectrum analyzer sorts and displays the list of the peaks according
to the amplitude of the peaks (highest amplitude first). If PKSORT is set to 1, the spectrum
analyzer sorts and displays the list of the peaks according to frequency (lowest frequency signal
peak is listed first).
See “PKRES” for information about how to get the information in the peak table remotely.
You can execute the PKSORT command two different ways. You can either execute the
PKSORT command directly (for example,
"PKSORT 1;
‘I)
or use the MOV command to move
the 1 or 0 into the PKSORT command (for example,
"MOV
PKSORT,l;").
If you use the MOV
command, no text is displayed in the active function area during command execution.
Query Response
decreasing
Programming Commands
5-433