DOTDENS

Dot Density

Sets the dot density value in the Analog+ display mode.
Syntax
dot
XDOTDENS
Item Description/Default Range
Number Any valid integer number.
1 to 40.
Equivalent
Softkey:
BNfiOG+
ON
OFF .
Option Required: Option 101 or 301.
Preset State: 15.
Related Commands: ANLGPLUS.
Example
OUTPUT 718;"ANLGPLUS ON;"
Turns on the Analog+ display
mode.
OUTPUT
718;"DOTDENS
40;"
Sets the dot
density
to 40.
Description
The dot density value can be set from 1 to 40 dots per trace element. This command is specific
to the Analog+ display mode; see “ANLGPLUS” for more information about the Analog+
display mode.
Query Response
output
termination
-
5.140
Programming Commands