ZMKPKNR

Zone Marker for Next Right Peak

Places the zone marker at the next peak to the right of the zone marker’s current position.
Syntax
XZMKPKNR
Equivalent Softkey (HP 85913, HP 85933, HP 85943, HP 85953, or HP 85963 only):
ZOIJE
PK
RfGHT
.
Related Commands: MKPX,
WINON,
ZMKCNTR, ZMKSPAN, ZMKPKNL.
Example
OUTPUT
718;"WINON;"
Turns on the windows display
wmd.e.
OUTPUT
718;"ZMKPKNR;"
Places the zone marker at the next peak to the right of the current
position of the zone
marker:
Description
ZMKPKNR does the following:
1. Searches for the next signal peak outside and to the right of the zone marker. ZMKPKNR
only applies if the window is in a non-zero span; ZMKPKNR does not apply if the window is
in the time domain.
2. If a peak is found, moves the zone marker so that it is centered around the peak. If a signal
peak cannot be found, or the window is in zero span, the zone marker is not moved.
3. Changes the center frequency of the lower window to the frequency of the signal peak.
To be considered a signal peak, the signal must be greater than the peak excursion (see
“MKPX” for more information about the peak excursion).
ZMKPKNR should only be used
when the
windows display mode is turned on.
5-602
Programming Commands