RCLS Recall State

RCLS

Recall State

Recalls spectrum analyzer state data from the specified state register in spectrum analyzer
memory.
Syntax
state
r
register
Item Description/Default Range
Number Any real or integer number.
1 to 9
Equivalent
Softkey:
INTEHMAL
-> STATE .
Related Commands: LOAD,
POWERON,
RCLT, SAVES.
Example
OUTPUT 718
;
“IP
;
CF
300MHZ
;
SP
1MHZ
;
I’
Changes centerfreqwnc2(, span.
OUTPUT 718
;
“SAVES 3
;
”
Saves state in register 3.
OUTPUT
718.
“IP
*
”
s
,
OUTPUT 7 18
*
“RCLS
3
*
”
,
,
Recalls the contents of register 3.
Description
You can specify a state register number from one to nine. Registers one through eight are
reserved for your use. Registers one through eight contain instrument state information if
instrument state information has been stored in it with the SAVES command. State register
nine contains the previous state data.
Note
The RCLS recalls state data from spectrum analyzer memory. See “LOAD” or
“SAVRCLN” to recall state data from the memory card.
Programming Commands 5-458