OBWPCT Occupied Bandwidth Percent

OBWPCT

Occupied Bandwidth Percent

Specifies the percent of total power that is to be used in calculating the occupied bandwidth
(OBW).
Syntax
% percent
/
\
f+
Item Description/Default
R-k3
Number Any real or integer number.
1% to 99.99%.
Equivalent
Softkey:
OCC
l3W
%
POWER.
Initial Value: 99.
Preset State: Last value entered.
Related Commands: OBW.
Example
OUTPUT
718;“MOV
OBWPCT,SO;”
Sets the occupied bandwidth percent to 50%.
OUTPUT 718; “OBW;
”
I+yforms
the occupied bandwidth
wteasurement.
Description
Once you enter a value into OBWPCT, that value is retained until you change it, or execute
DISPOSE ALL. Pressing
(j-1
or turning the spectrum analyzer off does not change the
value of OBWPCT.
You can execute the OBWPCT command two different ways. You can either execute the
OBWPCT command directly (for example,
“OBWPCT 50
;
I’)
or use the MOV command to move
the value into the OBWPCT command (for example,
“MOV
OBWPCT
,50
;
‘I).
If you use the MOV
command, no text is displayed in the active function area during command execution.
Query Response
/
percent ,
output
terminot ion
--*
Programming Commands
5.388