AMD SC3200 Bit Description Index 54h-59h, Index 5Ah, Index 5Bh Decode Control Register 2 R/W, 196

32581C Core Logic Module - Bridge, GPIO, and LPC Registers - Function 0

Table 6-29. F0: PCI Header/Bridge Configuration Registers for GPIO and LPC Support (Continued)

Bit

Description

Index 54h-59h	Reserved	Reset Value: 00h
Index 5Ah	Decode Control Register 1 (R/W)	Reset Value: 01h

Indicates PCI positive or negative decoding for various I/O ports on the ISA bus.

Note: Positive decoding by the Core Logic module speeds up I/O cycle time. The I/O ports mentioned in the bit descriptions below, do not exist in the Core Logic module. It is assumed that if positive decode is enabled for a port, the port exists on the ISA bus.

7Secondary Floppy Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O ports 372h-375h and 377h.

0:Subtractive.

1:Positive.

6Primary Floppy Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O ports 3F2h-3F5h and 3F7h.

0:Subtractive.

1:Positive.

5COM4 Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O ports 2E8h-2EFh.

0:Subtractive.

1:Positive.

4COM3 Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O ports 3E8h-3EFh.

0:Subtractive.

1:Positive.

3COM2 Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O ports 2F8h-2FFh.

0:Subtractive.

1:Positive.

2COM1 Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O ports 3F8h-3FFh.

0:Subtractive.

1:Positive.

1Keyboard Controller Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O Ports 060h and 064h (as well as 062h and 066h, if enabled - F4 Index 5Bh[7] = 1).

0:Subtractive.

1:Positive.

Note: If F0BAR1+I/O Offset 10h bits 10 = 0 and 16 = 1, then this bit must be written 0.

0Real-Time Clock Positive Decode. Selects PCI positive or subtractive decoding for accesses to I/O Ports 070h-073h.

0:Subtractive.

1:Positive.

Index 5Bh Decode Control Register 2 (R/W) Reset Value: 20h

Note: Positive decoding by the Core Logic module speeds up the I/O cycle time. The Keyboard, LPT3, LPT2, and LPT1 I/O ports do not exist in the Core Logic module. It is assumed that if positive decoding is enabled for any of these ports, the port exists on the ISA bus.

7Keyboard I/O Port 062h/066h Positive Decode. This alternate port to the keyboard controller is provided in support of power management features.

0:Disable.

1:Enable.

6 Reserved. Must be set to 0.

5BIOS ROM Positive Decode. Selects PCI positive or subtractive decoding for accesses to the configured ROM space.

0:Subtractive.

1:Positive.

ROM configuration is at F0 Index 52h[2:0].

196 AMD Geode™ SC3200 Processor Data Book