Video Processor Module - Video Processor Registers - Function 4

32581C

Table 7-7. F4BAR0+Memory Offset: Video Processor Configuration Registers (Continued)

Bit

Description

8GFX_INS_VIDEO (Graphics Inside Video). This bit works in conjunction with bit COLOR_CHROMA_SEL (F4BAR0+Mem- ory Offset 4Ch[20]). COLOR_CHROMA_SEL selects whether the graphics is used for color keying or the video data stream is used for chroma keying. If COLOR_CHROMA_SEL = 0, graphics data is compared to the color key. If COLOR_CHROMA_SEL = 1, video data is compared to the chroma key.

0:Outside the alpha windows, graphics or video is displayed depending on the result of the color key comparison.

1:Outside the alpha windows, only video is displayed (if COLOR_CHROMA_SEL = 0) or only graphics is displayed (if COLOR_CHROMA_SEL = 1) color key comparison is not performed outside the alpha windows.

7VID_WIN_PUSH_EN (Video Window Push Enable). Video window repositioning at an offset of 1 line below the pro- grammed value. Facilitates line rate matching in both fields.

0:Disable. (Default)

1:Enable.

6TOP_LINE_IN_ODD (Top Line in Odd Field). Allows selection of what field the top line is in.

0:Top line is in even field. (Default)

1:Top line is in odd field.

5Reserved.

4INSERT_EN (Insert Enable). When this bit is set, the odd frame is shifted with respect to the even frame.

0:No shifting occurs.

1:The odd frame is shifted according to the offset specified in bits [2:0].

3Reserved.

2:0

OFFSET (Vertical Scaler Offset). For a non-interlaced video stream and when bob de-interlacing is used, program a value

 

of 100 (i.e., shift one line); otherwise, leave at 000.

 

 

 

 

Offset 50h-53h

Cursor Color Key Register (R/W)

Reset Value: 00000000h

 

 

 

 

31:29

Reserved.

 

 

 

 

28:24

COLOR_REG_OFFSET (Cursor Color Register Offset). This field indicates a bit in the incoming graphics stream. It is

 

used to indicate which of the two possible cursor color registers should be used for color key matches for the bits in the

 

graphics stream.

 

 

 

 

23:0

CUR_COLOR_KEY (Cursor Color Key). Specifies the 24-bit RGB value of the cursor color key. The incoming graphics

 

stream is compared with this value. If a match is detected, the pixel is replaced by a 24-bit value from one of the Cursor

 

Color registers.

 

 

 

 

 

 

Offset 54h-57h

Cursor Color Mask Register (R/W)

Reset Value: 00000000h

 

 

 

 

31:24

Reserved

 

 

 

 

23:0

CUR_COLOR_MASK (Cursor Color Mask). This mask is a 24-bit value. Zeroes in the mask cause the corresponding bits

in the incoming graphics stream to be ignored.

Offset 58h-5Bh

Cursor Color Register 1 (R/W)

Reset Value: 00000000h

 

 

 

 

31:24

Reserved

 

 

 

 

23:0

CUR_COLOR_REG1 (Cursor Color Register 1). Specifies a 24-bit cursor color value. This is an RGB value (for RGB

 

blending) or a YUV value (for YUV blending). In interlaced YUV blending mode, Y/2 value should be used.

This is one of two possible cursor color values. The COLOR_REG_OFFSET bits (F4BAR0+Memory Offset 50h[28:24]) determine a bit of the graphics data that if even, selects this color to be used.

Offset 5Ch-5Fh

Cursor Color Register 2 (R/W)

Reset Value: 00000000h

 

 

 

 

31:24

Reserved

 

 

 

 

23:0

CUR_COLOR_REG2 (Cursor Color Register 2). Specifies a 24-bit cursor color value. This is an RGB value (for RGB

 

blending) or a YUV value (for YUV blending). In interlaced YUV blending mode, Y/2 value should be used.

This is one of two possible cursor color values. The COLOR_REG_OFFSET bits (F4BAR0+Memory Offset 50h[28:24]) determine a bit of the graphics data that if even, selects this color to be used.

AMD Geode™ SC3200 Processor Data Book

339

Page 339
Image 339
AMD manual Offset 50h-53h, Offset 54h-57h, AMD Geode SC3200 Processor Data Book 339