Core Logic Module - Bridge, GPIO, and LPC Registers - Function 0

32581C

Table 6-29. F0: PCI Header/Bridge Configuration Registers for GPIO and LPC Support (Continued)

Bit

Description

Index 86h

Second Level PME/SMI Status Mirror Register 3 (RO)

Reset Value: 00h

The bits in this register contain second level status reporting. Top level status is reported in F1BAR0+I/O Offset 00h/02h[0].

This register is called a “Mirror” register since an identical register exists at F0 Index F6h. Reading this register does not clear the status, while reading its counterpart at F0 Index F6h clears the status at both the second and top levels.

7Video Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to the Video I/O Trap.

0:No.

1:Yes.

To enable SMI generation, set F0 Index 82h[7] to 1.

6Reserved.

5Secondary Hard Disk Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to the secondary hard disk.

0:No.

1:Yes.

To enable SMI generation, set F0 Index 83h[6] to 1.

4Secondary Hard Disk Idle Timer SMI Status. Indicates whether or not an SMI was caused by expiration of Secondary Hard Disk Idle Timer Count register (F0 Index ACh).

0:No.

1:Yes.

To enable SMI generation, set F0 Index 83h[7] to 1.

3Keyboard/Mouse Access Trap SMI Status. Indicates whether or not an SMI was caused by an trapped I/O access to the keyboard or mouse.

0:No.

1:Yes.

To enable SMI generation, set F0 Index 82h[3] to 1.

2Parallel/Serial Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to either the serial or parallel ports.

0:No.

1:Yes.

To enable SMI generation, set F0 Index 82h[2] to 1.

1Floppy Disk Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to the floppy disk.

0:No.

1:Yes.

To enable SMI generation, set F0 Index 82h[1] to 1.

0Primary Hard Disk Access Trap SMI Status. Indicates whether or not an SMI was caused by a trapped I/O access to the primary hard disk.

0:No.

1:Yes.

To enable SMI generation, set F0 Index 82h[0] to 1.

AMD Geode™ SC3200 Processor Data Book

207

Page 207
Image 207
AMD manual Reserved, AMD Geode SC3200 Processor Data Book 207