ATI Technologies P/N 137-70268-20 MulTView audio requirements, To open and close MulTView

48 MulTView™

To open and close MulTView

1Right-click the control panel or the video panel.

2In the Feature menu, click MulTView, then click Show.

To close MulTView click the Close button .

•Or right-click the control panel or the video panel.

•In the Feature menu, click Show.

To change the location of the MulTView window

When the main video window is in full screen, right-click the control panel or the video panel, click MulTView, click Location, then click the position you want: Top-Left, Top- Right, Bottom-Right, or Bottom-Left.

You can manually change the embedded window's size and location when the MulTView borders are visible.

Autohiding MulTView window controls and borders

The MulTView window borders disappear after a few seconds of mouse inactivity on the MulTView window. When you move your mouse over the MulTView window, the border re- appears.

Only one video window can be in control. When the embedded MulTView window is in focus, its borders are red; when it is not in focus, its borders are black. For example when the borders are red, a REMOTE WONDER (see page 3) channel- change command will change the MulTView channel.

MulTView audio requirements

If you have one audio card or an integrated audio chip, you must connect one audio path internally (CD-In, for example) and the other externally (Line-In, for example).

If you have two audio cards or one audio card and an integrated audio chip, you can connect both audio paths internally, externally, or one internally and the other externally.