Bay Technical Associates 350 manual Appendix C Switch Default Settings

Appendix C

Switch Default Settings

Table C-1 lists the factory default settings for the BayStack 350 switch.

Table C-1.	Factory default settings for the BayStack 350 switch
Field		Default Setting	Appears in This CI Screen
BootP Request Mode		BootP When Needed	IP Configuration
In-Band IP Address		0.0.0.0 (no IP address assigned)
In-Band Subnet Mask		0.0.0.0 (no subnet mask assigned)
Default Gateway		0.0.0.0 (no IP address assigned)
Read-Only Community String		public	SNMP Configuration
Read-Write Community String		private
Trap IP Address		0.0.0.0 (no IP address assigned)
Community String		Zero-length string
Authentication Trap		Enabled
sysContact		Zero-length string	System Characteristics
sysName		Zero-length string
sysLocation		Zero-length string
Aging Time		300 seconds	MAC Address Table
Find an Address		00-00-00-00-00-00
		(no MAC address assigned)
V1 through V8		All ports configured in VLAN V1	VLAN Configuration
Status		Enabled for all ports	Port Configuration
Auto Negotiation		Enabled for all ports*

893-00992-B C-1