Bay Technical Associates manual Using the BayStack 350 10/100 Autosense Switch

Using the BayStack 350 10/100 Autosense Switch

Table 3-1. Console interface main menu commands (continued)

Command	Description
Reset to Default Settings	Resets the switch to the factory default configuration settings. When you
	select this command, the switch resets, runs a self-test, and displays the
	main menu.
	Caution: If you choose the Reset to Default Settings command, all of
	your configured settings will be replaced with factory default settings
Logout	when you press [Enter].
	The Logout command allows a user in a TELNET session or a user
	working at a password-protected console terminal to terminate the
	session (see “Logout” onpage 3-55).

3-8 893-00992-B