Bay Technical Associates 350 manual Front and back panel components, Icon/Label Description

Getting Started

Table 1-1.		Front and back panel components
Item	Icon/Label		Description
1	Power		Power LED (green)
			On: DC power is available to the switch’s internal circuitry.
2	Diagnostics		Diagnostics LED (green)
			On: The switch passes the self-test.
			Blinking: A nonfatal error occurs during the self-test.
			Off: The switch fails the self-test.

313 and 14 100BASE-FX fiber optic port connectors (Model 350F only).

41 through 12* 10BASE-T/100BASE-TX RJ-45 (8-pin modular) port connectors.†

513 and 14 100BASE-FX port status LEDs, ports 13 and 14 (Model 350F only).

6	100	100BASE-FX/TX port status LEDs (green):
		On: The corresponding port is set to operate at 100 Mb/s.
		Blinking: The corresponding port is management disabled.
7	10‡	10BASE-T port status LEDs (yellow):
		On: The corresponding port is set to operate at 10 Mb/s.
		Blinking: The corresponding port is management disabled.
8	FDX	Full-duplex port status LEDs (green):
		On: The corresponding port is in full-duplex mode.
		Off: The corresponding port is in half-duplex mode.
9	Activity	Port activity LEDs (green):
		Blinking: Indicates the network activity level for the corresponding port.
		A high level of network activity can cause LEDs to appear to be on
		continuously.
10		Manufacturing label: Lists the device model number, serial number, MAC address,
		and voltage rating.
11	RS232	Service port DB-9 (RS-232-D) serial port connector: Allows the attachment of a
		console terminal device for accessing the console interface (CI) screens.
12		AC power receptacle: Accepts the AC power cord (supplied).

*. 1 through 16 for BayStack Model 350T.

†.Require 100-ohm unshielded twisted pair (UTP) cable. The RJ-45 connectors are wired as MDI-X ports to connect end stations without using crossover cables.

‡. Not available on BayStack Model 350F fiber optic ports 13 and 14.

893-00992-B 1-3