Bay Technical Associates 350 manual Wall Mounting the Switch

Installation

Wall Mounting the Switch

To mount the BayStack 350 switch on a wall, follow these steps:

1.Using a Phillips (or cross-head) screwdriver, attach a mounting bracket to each side of the switch using the screws supplied with the unit (Figure 2-2).

2.Insert two screws (not supplied) through each of the mounting brackets, then tighten the screws (Figure 2-4).

3.Proceed to “Connecting Port Cables” on page 2-12 to connect the network cables.

587FA

Figure 2-4. Wall mounting the BayStack 350 switch

893-00992-B 2-9