Bay Technical Associates 350 manual Installing on a Tabletop or Shelf

Installation

Installing on a Tabletop or Shelf

To install the BayStack 350 switch on a tabletop or shelf, follow these steps:

1.Attach a rubber footpad to each corner on the bottom of the unit (Figure 2-3).

2.Position the switch on the tabletop or shelf, with the front panel facing you. Be sure to leave adequate space around the unit for ventilation and access to the cables.

3.If you are securing the switch to a tabletop or shelf, insert two screws (not supplied) through each of the mounting brackets, then tighten the screws.

4.Proceed to “Connecting Port Cables” on page 2-12 to connect the network cables.

310T

586FA

Figure 2-3. Attaching the rubber footpads

893-00992-B 2-7