Bay Technical Associates 350 Rack Mounting, Attaching the mounting brackets for a rack mount

Using the BayStack 350 10/100 Autosense Switch

Rack Mounting

The BayStack 350 switch occupies one single-unit rack space and can be installed in most standard 19-inch racks.

Caution: When mounting this device in a rack, do not stack units directly on top of one another in the rack. Each unit must be secured to the rack with appropriate mounting brackets. Mounting brackets are not designed to support multiple units.

To install the BayStack 350 switch in a 19-inch rack, follow these steps:

Note: When mounting this device in a rack, do not attach the four rubber footpads supplied with the unit.

1.If rubber footpads are attached to the bottom of the unit, remove them.

2.Locate the rack-mounting holes on each side of the switch (Figure 2-5).

3.Using a Phillips (or cross-head) screwdriver, attach a mounting bracket to each side of the switch using the screws supplied with the unit.

witch

350T	10/100
		Autosense
			Switch

610FA

Figure 2-5. Attaching the mounting brackets for a rack mount

2-10 893-00992-B