
|
| Using the Console Interface |
|
| |
| Table | |
Table | Port Configuration screen fields | |
|
|
|
Field | Description |
|
|
| |
Port | Indicates the switch port numbers, from 1 to 16, that correspond to the field settings | |
| in that row of the screen (for example, the field settings in row 2 apply to switch port | |
| 2). Note that settings in the All row (bottom row) apply to all 16 switch ports. | |
Status | Allows you to disable any of the switch ports. You can use this feature to control | |
| access to any switch port. | |
| Default Value | Enabled |
| Range | Enabled, Disabled |
Link | A | |
| follows: |
|
•Up: The port is connected and operational.
•Down: The port is not connected or is not operational.
Auto Negotiation* When enabled, sets the corresponding port speed to match the best service provided
by the connected station, up to 100 Mb/s in
Default Value | Enabled |
Range | Enabled, Disabled |
Speed/Duplex† Allows you to manually configure any port to support an Ethernet speed of 10 or 100 Mb/s, in half- or
Range | 10 Mbs/Half, 10Mbs/Full, 100Mbs/Half, 100Mbs/Full |
*. You cannot modify this field for the BayStack Model 350F switch
†.The BayStack Model 350F switch