Bay Technical Associates 350 1 describes the CI main menu commands, Using the Console Interface

			Using the Console Interface
	Table 3-1 describes the CI main menu commands.
Table 3-1.	Console interface main menu commands
Command		Description
IP Configuration...		Displays the IP Configuration screen (see “IP Configuration” on
		page 3-9). This screen allows you to set or modify IP configuration
		parameters.
SNMP Configuration...		Displays the SNMP Configuration screen (see “SNMP Configuration” on
		page 3-14). This screen allows you to set or modify the SNMP read-only
		community and read-write community strings, enable or disable the
		authentication trap, set the IP address of trap receivers, and set the trap
		community strings.
System Characteristics...		Displays the System Characteristics screen (see “System
		Characteristics” on page 3-16). This screen allows you to view switch
		characteristics such as the number of resets and the hardware and
		firmware version. This screen also contains three user-configurable
		fields: sysContact, sysName, and sysLocation.
Switch Configuration...		Displays the Switch Configuration Menu (see “Switch Configuration” on
		page 3-18). This menu provides the following configuration commands:
		MAC Address Table, VLAN Configuration, Port Configuration, Rate
		Limiting Configuration, Display Port Statistics, and Clear Port Statistics.
Service Port Configuration...		Displays the Service Port Configuration screen (see “Service Port
		Configuration” onpage 3-37).
Spanning Tree Configuration...
		Displays the Spanning Tree Configuration Menu (see “Spanning Tree
		Configuration” onpage 3-39).
TELNET Configuration...
		Displays the TELNET Configuration screen (see “TELNET
		Configuration” onpage 3-45).
Software Download...
		Displays the Software Download screen (see “Software Download” on
		page 3-48).
Display Event Log		Displays the Event Log screen (see “Display Event Log” onpage 3-51).
Reset
		Resets the switch with the current configuration settings. When you
		select this command, the switch resets, runs a self-test, and displays the
		main menu.

893-00992-B 3-7