Bay Technical Associates 350 manual Attaching the Mounting Bracket

Using the BayStack 350 10/100 Autosense Switch

Attaching the Mounting Bracket

Figure 2-2 shows the mounting-bracket positions for mounting the BayStack 350 switch on a flat surface such as a tabletop, shelf, or wall. When rack mounting the switch, you use the same brackets, but position them to attach to the rack-mounting holes in the chassis (Figure 2-5).

To attach the mounting brackets for a surface mount, follow these steps:

1.Locate the rack-mounting holes on each side of the switch (Figure 2-2).

2.Using a Phillips (or cross-head) screwdriver, attach a mounting bracket to each side of the switch using the screws supplied with the unit.

3.Secure the switch to the tabletop, shelf, or wall as described in the appropriate section.

350T	10/100
		Autosense
			Switch

585FA

Figure 2-2. Attaching the mounting brackets for a surface mount

2-6 893-00992-B