Bay Technical Associates 350 manual Reset, Self-Test screen after resetting the switch

Using the Console Interface

Reset

The Reset command allows you to reset the switch without erasing any configured switch parameters.

Resetting the switch takes approximately five seconds to complete. During this time, the switch initiates a self-test that comprises various diagnostic routines and subtests.

The results of the self-test are displayed briefly in the BayStack 350 switch Self-Test screen (Figure 3-26), which is followed by the CI screens.

BayStack Model 350T Self-Test
ASIC addressing test	... Pass
ASIC buffer RAM test	... Pass
Physical layer test	... Pass

Port internal loopback test ... Pass

Self-test complete.

Figure 3-26. Self-Test screen after resetting the switch

Note: The Self-Test screen remains displayed only if the self-test detects a fatal error.

The switch LEDs also display various patterns to indicate that the subtests are in progress.

893-00992-B 3-53