Black Box 5000 manual 104

Multiserver 5000

REVIEWING ASYNC-CHANNEL CONFIGURATION

To review async-data channels, enter the View Configuration menu.

COMMAND FACILITY MAIN MENU [node id]

1 VIEW CONFIGURATION

VIEW CONFIGURATION [node id]

1 ASYNC CHANNELS

ENTER NODE-ID/CHANNEL# (OR RANGE OF CHANNELS)(^X TO ABORT):

At this prompt, enter the node ID, a slash, and an async channel or range of channels you wish to review. (Channel ranges should be in the form: starting channel, dash, ending channel. For example, channels B1 through B6 would be entered as B1-B6.)

After the channel (or range) has been entered, the Async Channels menu appears.

ASYNC CHANNELS

1.CHANNEL CHARACTERISTICS

2.CHANNEL FEATURES

3.EXTENDED FEATURES

4.SWITCHING PARAMETERS

Choose an option and the configuration information will display. (Option 4, Switching Parameters, is reviewed in Section 10.12.) All async channels in the range will be displayed. If there are non-async channels in the range, they will not be displayed.

Async Channel Characteristics. See Table 9-8for information on each of the characteristics.

[node id] CHANNEL CHARACTERISTICS
	DATA	CODE	STOP	HOST		BUFFER	FLOW	DELAYS
CH	RATE	LVL	PAR BIT	TERM	XON XOFF	CONTROL	CONTROL	ECHO CR LF FF

---------------------------------------------------------------------------

A05	9600	8	MRK	1	TERM	DC1	DC3	XN/XF	NONE	ON	0	0	0
A06	9600	8	NON	1	TERM	DC1	DC3	XN/XF	XN/XF	OFF	0	0	0

ENTER CARRIAGE RETURN TO CONTINUE

104