
Multiserver 5000
Screen Display Messages
Message | Message Type | Explanation |
|
|
|
OUTPUT DATA TEST COMPLETE | Diagnostic | An async channel output test is complete. |
PRESS BREAK TO | Diagnostic | To terminate a channel loopback or channel |
TERMINATE TEST |
| output test, press the <break> key. |
QUEUE n/c cl | Event | Port c of node n has been placed in a |
|
| |
|
| class. |
ni RECEIVER BUSY LINK ci | Event | The local receiver detected a busy signal. |
ni RECEIVER DIALING | Event | The ADB software is dialing the receiver |
LINK ci |
| number for link ci. |
ni RECEIVER RING | Event | A call is coming in on the receiver side. |
DETECT LINK ci |
|
|
REMOTE DIGITAL | Diagnostic | The local modem has activated the remote |
LOOP LINK # ci |
| modem’s digital loop test. |
REMOTE FOX | Diagnostic | The port has been placed into a remote fox |
|
| loopback test. |
ni REMOTE LINK | Event | Node ni on link ci has been restarted. |
RESTART ci |
|
|
REMOTE MUX DOES | Info | You attempted to enable data compression on |
NOT SUPPORT |
| the remote node, and either the link is down or |
COMPRESSION |
| the remote multiplexer does not support |
|
| compression. |
REMOTE TEST, ECHO | Diagnostic | The port has been placed into a remote echo |
INPUT |
| loopback test. |
REMOTE TX TEST | Diagnostic | The local modem is sending a test pattern to |
PATTERN LINK # ci |
| the remote modem to aid you in determining if the |
|
| telephone line is defective. |
REMOTE VF LOOP | Diagnostic | The receiver of the remote modem is looped |
LINK # ci |
| though the remote transmitter after it is amplified. |
REMOTE 1004 HZ | Diagnostic | The remote modem is transmitting a test tone |
TONE LINK # ci |
| of 1004 Hz over the VF lines. |
REPORT INHIBITED | Info | A voice/fax status report has been requested for the |
|
| feeder mux. The feeder mux cannot be connected: |
|
| • Mux is in composite loopback |
|
| • Link is out of sync. |