Black Box 5000 manual Message

		Appendix D: Messages
	Screen Display Messages
Message	Message Type	Explanation
CHANNEL NOT INSTALLED	Info	An attempt has been made to configure or test a
		voice/fax port and the port number selected is not a
		voice/fax port.
CHANNEL(S) NOT	Info	An attempt has been made to view the status
INSTALLED		or configuration of a range of ports that are not
		voice/fax ports.
CHANNEL REQUEST UNSUCCESSFUL, Info		The voice/fax port you are trying to test is
PLEASE RETRY		not working properly.
CHECK FOR PROPER	Info	The selection entered required either a CSU/DSU
DEVICE INSTALLATION		module. You have entered the wrong link number.
ni CMOS ERROR	Alarm	There is a problem detected in writing to the
		Multiserver configuration area. Contact your service
		representative.
COMMAND FACILITY	Info	The Command Facility Main Menu cannot be
DISABLED		accessed by the port requesting it.
COMMAND INHIBITED	Info	The password entered does not permit
BY PASSWORD		access to the selected menu. (The password is a
		status type rather than global type and permits
		access only to view, status, and disconnect
		functions.)
COMMAND MODE	Info	All available ports to the Command Mode
PORTS BUSY		are busy. Up to two ports and the dedicated
		Command Port (on the NMS Module) can access
		the Command Mode at one time.
CONFIGURATION INHIBITED	Info	Async or sync port configuration is being
WRONG CHANNEL TYPE		attempted, but the channel number selected is
		for a port of a different channel type.
CONFLICT IN	Info	An attempt has been made to copy channel
CHANNEL TYPES		parameters of two dissimilar channel types.
CONNECT n/c n/c cl	Event	Indicates the pair of ports that have been
		connected and the called port’s class. Also
		indicates a force-connection has been made.
CONNECT FAIL	Info	Unable to connect to the remote Command Facility
		from the local Command Facility.

223