Black Box 5000 manual Getting Started, Bench Configuration and Testing

		Table of Contents
Table of Contents (continued)
	5.5.7 Removing the CCM	46
5.6	Installation Procedures	47
	5.6.1 Install the Spacers	47
	5.6.2 Install the CCM	47
	5.6.3 Install Channel Expansion Modules	48
	5.6.4 Remaining Spacers	49
	5.6.5 Installing Blank Back Panels	49
	5.6.6 Put the Cover Back On	50
5.8	Converters (Optional Equipment)	51
	Installing Converters	51
	Removing Converters	51
6. Getting Started
6.1	Multiserver Base Unit Location	52
6.2	Connecting an ASCII Terminal	52
6.3	The Command Facility	53
	Access the Command Facility via the Command Mode using ^X <break>	53
	Access the Command Facility via $CMD	54
	Exiting the Command Facility	54
6.4	Reset Defaults	55
6.6	Name the Local Node	56
	Command Facility Configuration	56
	LCD/Keypad Configuration	57
	NMS Switch Configuration	57
6.6	Quick Setup	58
	Can You Do a Quick Setup?	58
	Preliminary Steps	58
	The Interconnect Link	58
	The Force-Connection	59
7. Bench Configuration and Testing
7.1	Overview	60
	Key to Examples and Illustrations	60
7.2	Using CSU/DSUs with the Interconnect Link	62
	Internal CSU/DSU to Internal CSU/DSU	62

5