Black Box 5000 manual Screen Display Messages

Multiserver 5000

Screen Display Messages

	Message	Message Type	Explanation
ni	ADB PROCESS ABORTED	Event	An attempt to place a call on the dial lines has
LINK # ci			failed. This message is displayed by the call
			originating modem.
APPLICABLE TO RTS		Info	In trying to configure an Integral LAN module,
FUNCTIONALITY ONLY			you have selected a module location which does not
			support RTS functionality. (Most likely there is a
			bridge-only product installed in the module location
			you selected. This does not require the configure
			menu.)
ni	BATTERY LOW	Alarm	Indicates the CMOS battery at node ni is low and a
			power loss could result in a cold start of the system.
ni	BUFFER OVERFLOW,	Alarm	Data has been lost at Multiserver node ni,
CHANNEL ci			port ci because of an overflow condition.
<BUSY>		Dialog	Message is sent only to async channel call
			originators using matrix switching when the
			requested resource is in use by another network
			user.
ni	BUSY LINK ci	Event	The automatic dial backup function has encountered
			a busy signal over the RX or TX dial lines.
CALL INITIATION ALARM		Alarm	Unable to connect to X.21 feeder mux after
			configured number of tries. Data in buffers has
			been discarded.
<CALL IN PROGRESS>		Dialog	Indicates that an async-call connection is in
			progress across the interconnect link.
ni	CD ACQUIRE ci	Event	Indicates carrier has been detected on the mux or
			interconnect link indicated by ci.
ni	CD LOSS ci	Alarm	Indicates carrier loss on link ci.
CHANNEL ci CURRENTLY		Info	The Command Facility Main Menu functions
USING COMMAND FACILITY			are already being used by the port indicated (ci).
CHANNEL INOPERABLE		Info	You have requested channel status for a voice/fax
			port that is not operational.
CHANNEL NOT		Info	An attempt has been made to force
CONNECTED, IN QUEUE			disconnect to one of the following:
OR INHIBITED			• A port already disconnected
			• A port waiting in the queue
			• An inhibited port, such as a link.

222