Black Box 5000 manual Same number as before

CHAPTER 8: Link Configuration

Table 8-2. X.21 Link Parameters (continued)

	Option	Default	Description
2.	Local X.21 Number	20	This option selects the number of times the Multiserver will attempt to
	of Retries		place a call over the X.21 network. The range is from 1 to 63 tries; the
			default is 20. When you select this option, the following prompt
			appears on the screen:
			ENTER LOCAL X.21 NUMBER OF RETRIES: [20]
			Enter the desired number. Press <cr>. To exit without changes, enter
			the same number as before.
3.	MB2 Mux X.21	Data Activity	This menu configures the feeder mux side of the X.21 link. There are
	Connect Mode	Connect	two options, DTR Connect and Data Activity Connect:
			DTR Connect. This option causes a connection to be made to the
			X.21 network whenever any user channel has DTR raised.
			Data Activity Connect. This option causes a connection to be made
			to the X.21 network whenever there is data activity on any channel.
			After selecting this option, you will be prompted to enter the time (in
			seconds) for the No Data Activity timeout period:
			ENTER X.21 NUMBER OF SECONDS: [5]
			Enter the desired time in seconds, from 1 to 20 (the default is 5). You
			must use whole numbers. Press <cr>. To terminate and return to the
			Command Facility Main Menu, press ^X.
4.	MB2 Mux X.21	20	This option selects the number of times the feeder mux will attempt to
	Number of Retries		place a call over the X.21 network. The range is from 1 to 63 tries; the

default is 20. When you select this option, the following prompt appears on the screen:

ENTER LOCAL X.21 NUMBER OF RETRIES: [20]

Enter the desired number. Press <cr>. To exit without changes, enter the same number as before.

79