Black Box 5000 manual 229

			Appendix D: Messages
		Screen Display Messages
	Message	Message Type	Explanation
NO ASYNC CHANNELS		Info	A port or ports in the range selected is not
WITHIN RANGE			configured for async.
NODE-CHANNEL NOT AVAILABLE		Info	A link port number was entered when
ENTER CARRIAGE RETURN			a sync, async, or voice/fax channel number
TO CONTINUE			was required.
NODE ID ALREADY IN USE		Info	You are trying to configure a node ID that has
			already been assigned in the network.
NODE NUMBER ALREADY		Info	You are trying to configure a node number
IN USE			that has already been assigned in the network.
ni	NO DIAL TONE LINK # ci	Event	The automatic dial-backup function was unable to
			detect a dial tone when it went off hook to place a
			call over the RX or TX dial lines.
ni	NO RECEIVER	Event	The ADB feature could not detect a dial tone at
DIAL TONE LINK ci			the receiver. Check the phone connection.
NO REMOTE CONNECT		Info	The user is attempting a remote echo/fox test
ACTIVE			from Command Mode with no connection made.
NO SYNC CHANNELS		Info	A port or ports in the range selected are not
WITHIN RANGE			configured for sync.
ni	NO TRANSMITTER	Event	The ADB feature could not detect a dial tone
DIAL TONE LINK ci			at the transmitter. Check the phone line.
NOT ALLOWED		Event	An invalid mode of operation has been entered; it
			will not be supported.
NOT SUPPORTED		Info	The requested voice/fax configuration parameter
			selected is not supported by your voice/fax module.
ni	NUMBER NOT	Event	The ADB number has not been configured for
CONFIGURED LINK ci			link ci; the ADB operation cannot continue.
NUMERIC REQUIRED		Info	The entry received was not a number.
OPERATIONAL PROCESSOR FAIL		Event	The modem failed the self-test. Contact your
FAIL			dealer.
OPERATIONAL PROCESSOR PASS		Event	Self-test complete.
OUT OF RANGE		Info	The range of numbers entered is not available in the
			unit.

229