
Network Management System (NETMan)
MICOM’s NETMan is a software package for PCs that manages Marathon networks. This product comes in two versions: NETM- an I (manages up to ten nodes) and NETMan III (manages more than ten nodes and up to 254 networks). A node, in this case, is a
Expansion Card: Model 5000E/6DMA
This module’s primary functionality is for the new Marathon 10K. For the Marathon 5K, it can serve as a
X.21 bis Support for Muxes
X.21 bis is a type of dynamic link required for use in Scandina- vian, German, Japanese and other networks. Unlike the Inter- connect and Mux links (leased line links) which are permanently connected, X.21 is a
Two New Sync Protocols
The new sync protocol options, RTS/CTS and Sync- Pad, offer more efficient use of bandwidth for byte- oriented protocols, which previously required the TDM or Fast Packet (formerly called transparent) options.
APPENDIX H: Additional Information
Async Channel Parity Conversion
The Marathon now converts mark, space, even, and odd parity and matches it to the required output. A terminal can now access several hosts in the network regardless of the host’s parity. Marathon parity now applies to data and messages. (Parity is not converted on feeder muxes.)
4.0 Kbps Voice
With Phase 3.0 software comes the ability to configure a 4.0 Kbps voice digitizing rate. This reduces the bandwidth required for voice/fax operation and will allow two voice channels to operate on a 9.6 Kbps link.
Dual Channel ISU: Model
The
251