Black Box 5000 manual Async Channel

							CHAPTER 10: Switching Configuration
10.12Review Switching Configuration for an
		Async Channel
					ENTER TO NODE-ID/CHANNEL#
To review the switching parameters of async
					(^X TO ABORT):
channels, enter the View Configuration Menu.
	COMMAND FACILITY MAIN MENU [node id]			At this prompt, enter a channel or range of
				channels (for example, DENVER/a2-a6).
		1	VIEW CONFIGURATION
					ASYNC CHANNEL
	VIEW CONFIGURATION [node id					4	SWITCHING PARAMETERS
		1	ASYNC CHANNELS
				The Multiserver will display the following
				information for each async channel in the range:

[node id]	CHANNEL SWITCHING PARAMETERS
CONN	UNBL	RESOURCE	DESTINTN	CAL	RCV	CHAR	CHANNEL	MTRX
CH PROT	RATE	CLASS	NODE/CLASS	INH	INH	SET	PASSWORD	SWTC

-------------------------------------------------------------------------

A03	DED	ON		xxxxxxxx/xxxxxx	NO	YES	ASC	xxxxxxxx	ENA
A04	DTR	OFF	xxxxxxxx		NO	NO	ASC		ENA
A05	AA	ON			YES	NO	NASC	xxxxxxxx	DISA
A06	DTR	ON			NO	NO	ASC		ENA
ENTER CARRIAGE RETURN TO				CONTINUE

CH	The channel number
CONN PROT	The connect protocol
	(DED, DTR, or AA)
UNBL RATE	Unbalanced rates (OFF or ON)
RESOURCE	Resource class name (up to 8
CLASS	characters possible)
DESTINTN	Destination name of node and class
NODE/CLASS	(up to 8 characters for node/class)

CAL INH	Call inhibit (NO or YES)
RCV INH	Receive inhibit (NO or YES)
CHAR SET	Character set (ASC=ASCII or
	NASC=non-ASCII)
CHANNEL	Assigned password (up to 8
PASSWORD	characters)
MTRX SWTC	Matrix switching (ENA=Enable or
	DISA=Disable)

129