Black Box 5000 manual Module and Channel Nomenclature

Multiserver 5000

the Multiserver 5000.

•The CCM module has six connectors and is located in module location A. From left to right these connectors are numbered sequentially (1 to 6).

The channel numbers correspond to the module and connector locations. The channel number for the connector on the far left side is A1. The next connector to the right is A2, and so on to the last connector, A6.

•The NMS Module has two channel numbers: The Log Port is $1 and the Command Port is $2.

•In the example shown in Figure 4-8, the Channel Expansion Module (CEM) in location B has 12 connectors, and their channel numbers are B1 through B12.

•In the same example, the voice module in location C has two voice channels, C1 and C2.

MODULE	LOCATION OF CONNECTOR	CHANNEL NUMBER B12
LOCATIONS	NUMBER 1
E

D

C

B

A

CHANNEL NUMBER A1

CHANNEL NUMBER $2

Figure 4-8. Module and Channel Nomenclature.

38