Black Box 5000 manual Remove the cover after taking out four fastening screws

Multiserver 5000

Figure 5-6. Remove the cover after taking out four fastening screws.

5.5.1UNPLUG THE MULTISERVER

Remove the power cord from the wall outlet.

The Multiserver unit contains electrosensitive components that could suffer damage from static discharge. Ground yourself by touching any grounded equipment. Touching the Multiserver’s chassis will not work. Since the unit is now unplugged, it is no longer grounded.

5.5.2REMOVE THE COVER

Using a Number 1 or Number 2 Phillips screwdriver, unscrew the four screws (two on each side) that secure the cover (Figure 5-6).

Lift off the cover.

Your cover has metallic finger stocks (Figure 5-7). Be careful not to handle them when removing the

DO NOT

TOUCH

Figure 5-7. Avoid handling the fine metal teeth on the edge of the cover.

44