Black Box 5000 manual 226

Multiserver 5000

Screen Display Messages

Message	Message Type	Explanation
INCOMPATIBLE	Info	You are trying to connect a mux link to the
LINK TYPES		port configured as an interconnect link or vice versa.
INCORRECT CHANNEL	Info	The port selected for the test desired is
TYPE		of the wrong type or an attempt has been made to
		broadcast to one of the following:
			• A link port
			• An out of service (OOS) port
			• A voice port
INHIBITED	Info	The feeder mux connected to the Multiserver
		Command Facility tried to activate a remote
		composite loopback on the link.
INPUT REQUIRED	Info	A <cr> without a data entry was received for a
		function which requires a data input, such as
		entering a channel number, or a new password.
INPUT TEST ACTIVE	Diagnostic	An async output test has been activated.
INTEGRAL DEVICE NOT	Info	No integral device has been installed in the
INSTALLED		module location you specified.
INVALID DATA	Info	One of three possibilities has occurred:
			• The remote Multiserver node ID was entered
			for a channel statistics request
			• There was an attempt to enable/disable a link
			• A remote node ID was entered for port
			configuration.
INVALID DESTINATION	Info	You have attempted to force-connect to an
STRING		unknown node.
INVALID ENTRY	Info	• A port other than A1 or A2 was entered when a
			request was made for status or configuration of
			an integral device.
		•	You have attempted to duplicate a class name
			which has already been defined.
INVALID NUMBER	Info	•	In configuring a voice or fax extension number,
			you have entered fewer than the required
			number of digits.
		•	The prompt requires a numeric input.
ISU DIGITAL LOOPBACK	Diagnostic	The ISU on link ci has been placed in digital
ACTIVE LINK # ci		loopback.

226