
Multiserver 5000
X.21 LINK | PARAMETERS |
|
|
|
| ||||
1. | LOCAL | X.21 | CONNECT | MODE | [DATA | ACTIVITY | CONNECT] | ||
2. | LOCAL | X.21 | NUMBER OF RETRIES |
|
| [20] | |||
3. | MB2 | X.21 | CONNECT MODE | [DATA | ACTIVITY | CONNECT] | |||
4. | MB2 | X.21 | NUMBER OF | RETRIES |
|
| [20] | ||
CR - ACCEPT DATA
M- MAIN MENU
ENTRY:
Table 8-2. X.21 Link Parameters
Option | Default | Description |
1. Local X.21 | Data Activity | Data Activity is currently the only option on this menu. |
Connect Mode | Connect | Therefore, Data Activity Connect is the only option for Multiserver |
|
| ports. For |
|
| Activity Connect causes a connection to be made to the X.21 network |
|
| whenever there is data activity on a channel or port that is connected |
|
| to a class of ports (on a feeder mux) via an X.21 link. |
|
| When you select Data Activity Connect, you will be asked to set (in |
|
| seconds) the |
|
| ENTER X.21 NUMBER OF SECONDS: [5] |
|
| Enter the desired time in seconds, from 1 to 20 (the default is 5). You |
|
| must use whole numbers. Press <cr>. To terminate and return to the |
|
| Command Facility Main Menu, press ^X. |
|
| When the X.21 link is in use and the Multiserver does not detect data |
|
| activity within the specified time, it will time out and drop the |
|
| connection. The link will remain in readiness for a call until the next |
|
| call request. |
(continued on next page)
78