Black Box 5000 manual 224

Multiserver 5000

Screen Display Messages

Message	Message Type	Explanation
CONNECT FAIL MATRIX n/c	Event	The matrix connection request made by the local
		port did not complete successfully. Also, the
		password may be incorrect.
<CONNECTED>	Dialog	This message is sent to the async user when a
		connection has been established across the link.
		An L or H may appear at the end if there are
		unbalanced rates.
		L = you are connected to a lower-speed device
		H = you are connected to a higher-speed device
DATA LOST	Info	The X.21 bis network is unable to synchronize
		across the link. Your data is lost.
DATE nn/nn	Event	Appears on each new day and any time the date is
		configured.
ni DDS IN SERVICE	Event	The ISU at node ni has returned to service
LINK ci		for link ci.
ni DDS OUT OF	Event	The ISU at node ni is out of service for link
SERVICE LINK ci		ci.
ni DDS RUNNING	Event	A loop test is being run on the ISU at node
LOOP TEST LINK ci		ni for link ci.
DEVICE BUSY	Event	The modem is temporarily busy.
ni DIAL CONNECTION	Event	The ADB option has completed the backup
MADE LINK # ci		dial connection for link ci.
ni DIALING RX PRIMARY	Info	The modem is dialing the primary RX dial line
LINK # ci		number in an attempt to connect to the remote unit
		via the dial lines. This message is displayed by the
		call-originating modem.
ni DIALING RX SECONDARY	Info	The modem is dialing the secondary RX dial
LINK # ci		line number. This usually indicates the call to the
		primary RX number cannot be completed (the
		number is busy, no answer, etc.). This message is
		displayed by the call-originating modem.
ni DIALING TX PRIMARY	Info	The modem is dialing the primary TX dial line
LINK # ci		number in an attempt to connect to the remote unit
		via the dial lines. This message is displayed by the
		call-originating modem.

224