Black Box 5000 manual Asychronous-Channel Switching Parameters, Menu options is discussed in Table

10.7Asychronous-Channel Switching Parameters

Control of async-channel switching capability is configured through the Switching Parameters menu. To access this menu, follow this menu sequence:

COMMAND FACILITY MAIN MENU [node id]

3 CONFIGURE LOCAL NODES

CONFIGURE LOCAL NODES [node id]

2 ASYNC CHANNEL

CHAPTER 10: Switching Configuration

ENTER TO NODE-ID/CHANNEL# (^X TO ABORT):

Enter the appropriate information and press <cr>. The Switching Parameters menu appears. Each of

ASYNC CHANNEL

4 SWITCHING PARAMETERS

the menu options is discussed in Table 10-2.

NOTE: See also Section 10.9, Connect Protocol Details. The interaction of three switching parameters—Protocol, Call Inhibit, and Receive Inhibit—is discussed extensively there.

SWITCHING PARAMETERS [node id/channel #]

1.	CONNECT PROTOCOL	[DEDICATED]
2.	UNBALANCED RATES	[ON]
3.	CALL INHIBIT	[NO]
4.	RECEIVE INHIBIT	[NO]
5.	CHARACTER SET	[ASCII]
6.	MATRIX SWITCHING	[ENABLE]

7.RESOURCE CLASS

8.DESTINATION NODE/CLASS

9.CHANNEL PASSWORD

CR - ACCEPT ENTRY

M- MAIN MENU P - PREVIOUS MENU

ENTRY:

115