Black Box 5000 manual 149

CHAPTER 11: Administration

5.	Voice/Fax Status	If the Multiserver is equipped with a voice/fax module, this option will display a range of
		ports selected, the input level, the mode (on hook, off hook, busy), the software
		revision, and, if applicable, the test mode and test status.
		When this options is selected, the following prompt appears:
		ENTER NODE-ID/CHANNEL # (OR RANGE OF CHANNELS)(^X TO ABORT):
		Enter the node ID, a slash, and the channel number (or range of channels). Press
		<cr>. The voice/fax channel status will display on the screen. See the MS1 Voice/Fax
		Card User’s Manual for more information.
6.	Integral Device	If the Multiserver is equipped with an integral device, this option will display the status
	Status	report of the leased line and dial backup activity. When this option is selected, the
		following prompt appears:

ENTER LINK CHANNEL # (^X TO ABORT):

Enter the port number of the link. Press <cr>. A Leased Dial Line Status is displayed.

[node id] LAST PERIOD REPORT(1)	TIME hh:mm:ss	DATE mm/dd
SYSTEM STATISTICS (INTERCONNECT LINK A01):

--------------------------------------------------------------

		TRANSMITTED	RECEIVED
FRAME COUNT (X100):		0	0
			LOCAL(2)
UTILIZATION %	=	COMPOSITE	20
		BUFFERS	57
EVENT COUNTS (X1)	=	RETRANSMITS	0
		LINE ALARMS	0
TIME (SECONDS) IN	=	SYS FLOW CTL	0
		SYNC LOSS	1
		CD LOSS	1

ENTER CARRIAGE RETURN TO CONTINUE

(1)The format for the Last Period Report and the Demand Report are the same.

(2)No remote status is shown for interconnect links.

149